Another world's first from LORCH - high speed TIG inverter with HF ignition capable of running on battery power!

This powerful little DC TIG welding inverter with LORCH's unique MicroBoost Technology is a seriously awesome machine.

Up to 200 amps TIG welding, 180 amps Stick with CEL capability, in a 6.8 kg portable package.

Robust and tough, protected if dropped from heights of up to 80cm, three times the standard required, keeps welding without a beat.

Ultimate flexibility both in the workshop and on site with the capability to run off mains power, generator, or LORCH's mobile battery.

No power fluctuation - even on cables up to 200metres long.

Handy by name, handy by nature! TIG and electrode welding, both ACDC and DC models available.

The robust, industrial casing protects the machine if dropped from heights of up to 60cm (AC/DC models) or 80cm, (DC models) - three times the standard required.

Extra light and extra strong.

The LORCH HandyTIG can even pulse! Exceptionally well suited to welding thin sheets.

Easy, intuitive operation. AC/DC models effortlessly toggle between the two and make welding stainless steel or aluminium simple options.

The LORCH T220 is a single phase, mobile AC/DC TIG welding inverter designed for industrial use.

The water-cooled model can be combined with a maxi-trolley to retain mobility.

LORCH smart technology controls the arc for maximum stability and penetration and low energy consumption.

Pulse and fast pulse up to 2 kHz.

HF ignition or ContacTig (contact ignition in HF sensitive environments).

Rugged and light,12kg in weight and portable, with an industrially strengthened case to protect against damage from falls up to 60 cm.

The LORCH T300 is a three phase, high frequency (HF), AC/DC TIG welding inverter for industrial use.

Gas cooled or  water cooled models are available, add a trolley for extra mobility.

Smart technology controls the arc for maximum stability and penetration, and low energy consumption.

Pulse and fast pulse up to 2 kHz

HF ignition or ContacTig (contact ignition in HF sensitive environments).

Extremely rugged with a strengthened case so protected against damage from falls up to 60 cm.

High output, high productivity TIG welding for the industrial workshop.

Three Phase, AC/DC TIG welding inverter, gas cooled or water cooled, in tough metal housing designed to last.

Innovative, cutting-edge microprocessor control technology which is unique to LORCH.

High Inverter frequency of 80kHz, very fast control and very smooth current for optimal TIG welding.

Standard pulse and High Frequency (HF) pulse up to 20 kHz. 

The special amplitude of the alternating current combined with an optimised current balance ensures superior results welding aluminium, in particular.

240 Amps @ 60% duty cycle.

High output, high productivity TIG welding for the industrial workshop.

LORCH's three phase, AC/DC TIG welding inverter is available as gas cooled or water cooled versions.

Manufactured in Germany with a tough metal housing designed to last.

Innovative, cutting-edge microprocessor control technology which is unique to LORCH.

Inverter frequency of 80kHz, very fast control and very smooth current for optimal TIG welding.

Standard pulse and High Frequency pulse up to 20 kHz. 

The special amplitude of the alternating current combined with an optimised current balance ensures superior results welding aluminium, in particular.

CIGWELD WELDSKILL 200HF INVERTER

CIGWELD's WeldSkill 200HF, single phase, high frequency inverter TIG welder is very operator-friendly, ideal for small fabrication shop or stainless work.

Simple, practical push button operation for mode selection, clearly visible LED indicators, and sturdy large control knob all make for easy manual control.

Small and light-weight, it is a great addition to the workshop and sitework if you need portability in light TIG fabrication and stainless steel work.

Very good pricepoint.

CIGWELD WELDSKILL 200 INVERTER (AC/DC)

The Weldskill 205 AC/DC is a 15 Amp 240 volt, digitally controlled, High Frequency AC/DC TIG and Stick inverter welding machine designed for the budget conscious user who doesn’t want to sacrifice on quality or weld results.

Compact and light, (12kg), and IP23S rated, the 205 AC/DC is ideal for indoor or outdoor use around the workshop.

Very suitable for light fabrication and maintenance of mild steels, stainless steels, and aluminum.

WENZL Are Proud To Support

97H 1200x280