There's a reason why we think we're the best in the NZ welding supply business

Our focus is on improving efficiency and reducing costs across your welding operation, not just on supplying products that we want to sell.

We work alongside you to solve any welding problem and ensure your work is done in the most effective, efficient and affordable way possible for you.

If you're a welder in NZ, we're your go-to team for expert advice, products and after-sales support.

LORCH MicorMIG 400 ControlPro + WF

Powerful MIG welding machine fully optimized for Australian and New Zealand conditions.

Very customizable. Available as a compact model or with a remote wire feed unit, strengthened industrial casing; gas-cooled, or water-cooled variants.

High-efficiency resonance inverter, Near Frequency Communication technology for upgrading or job management, and Lorch Wi-Fi Connect technology for big data management makes these machines the most technologically advanced GMAW (MIG-MAG) and FCAW systems on the planet.

Don't be put off by the technology though - these machines are simple to operate, dependable, and robust - everything you want in a welder. 

CIGWELD WELDSKILL 250C

The CIGWELD Weldskill 250 is one of the largest single phase transformer Mig machines in the NZ market.

Designed for the tradesmen, farmer or DIY handyman that needs consistent, quality welds.

CIGWELD welding machines have a long history in the NZ market and a reputation for reliability and robustness.

The Weldskill 250 provides excellent arc performance with solid and flux coated welding wires and can be used for welding with gasless wires.

CIGWELD WELDSKILL 350C PLANT

The CIGWELD Weldskill 350 is a three phase MIG welder with the option to add a wire feed unit and be able to weld from either the machine or the wire feeder at the flick of a switch, which can save a lot of set up time on some jobs.

Lighter than many other comparable welding machines of its size.

350amps @30% duty cycle, runs 0.6mm - 1.2mm wires with ease.

Really good robust welder for small workshops, repair work, farms, where three phase power is available.

LORCH MicorMIG 400 ControlPro + WF

All the best features of the MicorMIG Series; MicorBoost, Speed Processes, Dynamic Control, now + Pulse! 

New in 2018, LORCH has made the pulse function accessible and affordable without sacrificing the quality of performance.

As with the MicorMIG range, The MicorMIG Pulse is available in compact or remote wire feed models, gas or water-cooled, in the 300-500 amp range.

LORCH S3 mobile SpeedPulse XT

A Powerful MIG-MAG Pulse welding machine with superior duty cycles and maximum productivity.

LORCH's highly developed processor technology creates seamless interaction of all parameters and components in the welding process.

The Speed and Power of the unique technologies and on-demand functionality will slash your labour and other costs whilst producing exceptional quality welds.

LORCH S3 mobile SpeedPulse XT

Familiar with the Cigweld 320SP? Made by LORCH and, for a long time, the most popular pulse welder in NZ.

 The LORCH S3 Mobile SpeedPulse XT is the latest version; faster, smarter, intuitive to use, with incredibly innovative technology that is unique to LORCH.

The S-series pulse machines have taken Europe by storm - if you're welding aluminium - You need to try the S3!

CIGWELD TRANSMIG 320SP (POWER SOURCE)

The CIGWELD 320SP Pulse  was the most widely used synergic Mig Pulse machine in the NZ aluminium fabrication industries for many years.

The 320SP was actually made by LORCH of Germany and rebranded as a CIGWELD machine, and is now no longer available from CIGWELD.

However, the latest variant of the 320SP is now available in NZ direct from LORCH, same quality and ease of use, upgraded with the latest LORCH cutting edge technology and called by its original name; the LORCH S3 Mobile Speed Pulse XT

CIGWELD WeldSkill 185

The Transmig 185 Ultra is the latest addition to the well-known Cigweld range.

Single phase, multi-process, synergic inverter welding machine for smaller scale jobs or site use.

The large LED screen and easy user interface is specifically designed for Australian & NZ welders with pre-set synergic programmes for our plate thicknesses, consumables and gas types. Makes welding almost child's play - but can be customised by the more experienced welder to exactly suit their needs.

Runs on any 10amp powerpoint, machine weight of 17.4kg and compact size make it very portable.

185 Ultra Video

The LORCH MX350 is the ultimate workhorse for construction site and maintenance.

Multi-process for every application.

MIGMAG, can be paired with a remote wire feed unit.

TIG and Arc welding, with the power to handle large electrodes (up to 8mm) and gouging.

Extra-Tough industrial casing protects the machine if dropped from heights of up to 60cm and has a specially designed base for extra clearance and stability. 

All-round water protection and the internal circuit boards are protected from dust by InsideCoating.

CIGWELD TRANSMIG 250I PLANT

The CIGWELD Transmig 220i is a single phase, synergic inverter welding machine with full multiprocess capability; MIG welding with an integrated wire feed unit, Stick and Lift TIG welding. Takes up to 15kg spools of MIG wire.

Fitted with VRD (Voltage Reduction Device) for Stick welding. 

Designed for the welding professional.

CIGWELD TRANSMIG 350I PLANT

The CIGWELD Transmig 350i has been shown to be a reliable three-phase multiprocess inverter welding machine in NZ.

The digital control panel is clear and easy to operate.

the machine comes with a fully enclosed Transmig 4RT wirefeeder, and voltage reduction device (VRD applicable in stick mode only). digital voltage and amperage meters.

Will meet the operating needs of medium fabrication and heavier maintenance applications, particularly popular for use in machine fabrication workshops.

CIGWELD WeldSkill 185

The CIGWELD WeldSkill 185 is a single phase, multi-process inverter ideal for tradespersons or DIY.

Runs on any 10amp power point and simple to operate with regular, non-synergic control - just dial the knobs to adjust to the settings you need.

Equally easy whether you run MIG, Stick or use Lift TIG capability.

Versatile, portable, reliable and excellent value for your money.

CIGWELD TRANSMIG 450I PLANT

The CIGWELD Transmig 255i is one of the larger single phase, multi-process welding inverters, capable of Mig, Stick and Lift TIG welding.

Digital voltage and amperage control and all the features you would expect from a reliable, quality CIGWELD machine.

Ideal for onsite repairs and maintenance, medium industrial workshops, car panel repairs or serious welders who need a single phase inverter to plug in and use around  home workshops. Reliable quality at a cost effective price point.

Standard with 15 amp plug but can be upgradedto 25 amp and 4mm/2 supply lead to increase duty cycle.

Welds up to 12mm plate with up to 1.2mm consumables.

The LORCH T220 is a single phase, mobile AC/DC TIG welding inverter designed for industrial use.

The water-cooled model can be combined with a maxi-trolley to retain mobility.

LORCH smart technology controls the arc for maximum stability and penetration and low energy consumption.

Pulse and fast pulse up to 2 kHz.

HF ignition or ContacTig (contact ignition in HF sensitive environments).

Rugged and light,12kg in weight and portable, with an industrially strengthened case to protect against damage from falls up to 60 cm.

The LORCH T300 is a three phase, high frequency (HF), AC/DC TIG welding inverter for industrial use.

Gas cooled or  water cooled models are available, add a trolley for extra mobility.

Smart technology controls the arc for maximum stability and penetration, and low energy consumption.

Pulse and fast pulse up to 2 kHz

HF ignition or ContacTig (contact ignition in HF sensitive environments).

Extremely rugged with a strengthened case so protected against damage from falls up to 60 cm.

High output, high productivity TIG welding for the industrial workshop.

Three Phase, AC/DC TIG welding inverter, gas cooled or water cooled, in tough metal housing designed to last.

Innovative, cutting-edge microprocessor control technology which is unique to LORCH.

High Inverter frequency of 80kHz, very fast control and very smooth current for optimal TIG welding.

Standard pulse and High Frequency (HF) pulse up to 20 kHz. 

The special amplitude of the alternating current combined with an optimised current balance ensures superior results welding aluminium, in particular.

240 Amps @ 60% duty cycle.

High output, high productivity TIG welding for the industrial workshop.

LORCH's three phase, AC/DC TIG welding inverter is available as gas cooled or water cooled versions.

Manufactured in Germany with a tough metal housing designed to last.

Innovative, cutting-edge microprocessor control technology which is unique to LORCH.

Inverter frequency of 80kHz, very fast control and very smooth current for optimal TIG welding.

Standard pulse and High Frequency pulse up to 20 kHz. 

The special amplitude of the alternating current combined with an optimised current balance ensures superior results welding aluminium, in particular.

Another world's first from LORCH - high speed TIG inverter with HF ignition capable of running on battery power!

This powerful little DC TIG welding inverter with LORCH's unique MicroBoost Technology is a seriously awesome machine.

Up to 200 amps TIG welding, 180 amps Stick with CEL capability, in a 6.8 kg portable package.

Robust and tough, protected if dropped from heights of up to 80cm, three times the standard required, keeps welding without a beat.

Ultimate flexibility both in the workshop and on site with the capability to run off mains power, generator, or LORCH's mobile battery.

No power fluctuation - even on cables up to 200metres long.

Handy by name, handy by nature! TIG and electrode welding, both ACDC and DC models available.

The robust, industrial casing protects the machine if dropped from heights of up to 60cm (AC/DC models) or 80cm, (DC models) - three times the standard required.

Extra light and extra strong.

The LORCH HandyTIG can even pulse! Exceptionally well suited to welding thin sheets.

Easy, intuitive operation. AC/DC models effortlessly toggle between the two and make welding stainless steel or aluminium simple options.

CIGWELD WELDSKILL 200 INVERTER (AC/DC)

The Weldskill 205 AC/DC is a 15 Amp 240 volt, digitally controlled, High Frequency AC/DC TIG and Stick inverter welding machine designed for the budget conscious user who doesn’t want to sacrifice on quality or weld results.

Compact and light, (12kg), and IP23S rated, the 205 AC/DC is ideal for indoor or outdoor use around the workshop.

Very suitable for light fabrication and maintenance of mild steels, stainless steels, and aluminum.

CIGWELD WELDSKILL 200HF INVERTER

CIGWELD's WeldSkill 200HF, single phase, high frequency inverter TIG welder is very operator-friendly, ideal for small fabrication shop or stainless work.

Simple, practical push button operation for mode selection, clearly visible LED indicators, and sturdy large control knob all make for easy manual control.

Small and light-weight, it is a great addition to the workshop and sitework if you need portability in light TIG fabrication and stainless steel work.

Very good pricepoint.

LORCH X350 ControlPro

The smallest, toughest 350 Amp inverter arc welder in the NZ market, and probably the world, today.

Compact size and weight, (18.6kg), for portability, designed for harsh environments, and to exceed the standards needed for professional performance.

Extremely powerful, with optimized performance for rutile and basic electrodes up to 8mm, and cellulosic electrodes up to 6mm.

MicorUp - Special function for vertical seam welding - no weaving required, just straight up at consistent speed.

 LORCH's MicroBoost technology stores voltage and power to deliver exceptional starting and arc control, this ensures a smooth and stable arc with up to 200m of cables.

LORCH MicorStick 160

The LORCH MicorStick 180 is the slightly bigger brother of the MicorStick 160.

Still a very compact, robust, and powerful arc welding inverter for electrode welding, including CEL electrodes.

Light, at under 6 kg, and protected if dropped from heights of up to 80cm.

Ideal for demanding site jobs, LORCH's MicroBoost technology gives the MicorStick machines the capability to store power reserves, so any variability in power supply is smoothed out and extra power is there when a boost is needed.

The MicorStick can run off mains power, generator, (up to 200 metre cables with no power loss), or Lorch MobilePower battery for ultimate flexibility and easy access on tricky sites.

Super smooth starting, easy to use synergic Control Pro operating panel, just a really nice machine to stick weld with.

LORCH MicorStick 160

Compact, robust, and powerful beyond its small size arc welding inverter for perfect electrode welding.

Light, at under 5 kg, and super robust as protected from falls of up to 80cm -drop it and it just keeps welding.

Ideal for demanding site jobs, LORCH's MicroBoost technology puts this little welder well ahead of the international pack!

Carry it on your back with Lorch's MobilePower battery and you have the ultimate access to tricky site welding, no lugging cables around, moving generators, or trying to find a power source.

WENZL Are Proud To Support

97H 1200x280